To download the Okcar app for your Joxom JX-01 dash cam, you can find it directly in your mobile device's app store.
Download Links
For iPhone (iOS): Download on the Apple App Store
Note: Requires iOS 12.0 or later.
For Android: Download on Google Play Store
Note: There is also an "OKCAR PLUS" version available on Android; check your manual to see if your specific JX-01 batch recommends the standard or Plus version.
Quick Setup Guide
Once you have the app installed, follow these steps to link it to your dash cam:
Power On: Ensure the dash cam is plugged into your car's power source and turned on.
Enable Wi-Fi: Look for the Wi-Fi icon on the dash cam screen or check the settings menu to ensure Wi-Fi is broadcasting.
Connect Phone: Open your phone's Wi-Fi settings and connect to the network named something like "JOXOM_XXXX" or "NVT_XXXX".
Default Password: Usually
12345678.
Open App: Launch the Okcar app. It should automatically detect the camera. If not, tap the "Add Camera" or "Connect" button.
Troubleshooting Tip
If the app refuses to connect, try disabling your "Mobile Data" on your phone temporarily. Some phones will disconnect from the dash cam's Wi-Fi because that Wi-Fi signal doesn't provide internet access.
Since the Joxom JX-01 (often rebranded as J01 or J01 Pro) is a generic high-performance dash cam, a physical PDF of the manual is rarely hosted on a dedicated manufacturer website. Most users access the digital instructions through the Okcar app or follow these standard operational steps.
1. Basic Button Functions
Power Button: Short press to turn the screen on/off. Long press (3 seconds) to power the unit down completely.
Menu Button: Press while the camera is not recording to enter Settings.
OK Button: Starts/stops recording. Selects options in the menu.
Up/Down Buttons: Navigates menus. In video mode, the Down button often toggles the microphone on/off.
Mode/Emergency Lock: Short press while recording to manually "Lock" the current file (prevents it from being overwritten).
2. Recommended Menu Settings
Once you power the device on, press "OK" to stop recording, then "Menu" to adjust these key settings:
Resolution: Set to 3840x2160P (4K) for maximum clarity.
Loop Recording: Set to 3 Minutes. This creates manageable file sizes.
G-Sensor: Set to Low. If set to High, every bump in the road will "lock" a file, eventually filling your SD card with protected videos that won't delete automatically.
WDR (Wide Dynamic Range): Keep this ON for better detail in shadows and bright highlights.
Date Stamp: Ensure this is ON for insurance/legal purposes.
Time Zone: If you have the GPS model, set your GMT offset (e.g., GMT -5 for EST) so the clock syncs automatically.
3. Installation Steps
SD Card Prep: Insert a Class 10 U3 microSD card. The camera will usually prompt you to Format it on the first run—always do this inside the camera, not on your computer.
Mounting: Clean your windshield with alcohol. Apply the electrostatic film (if included) first, then stick the camera mount to the film. This makes removal much easier later.
Cable Routing: Tuck the power cable into the headliner and down the A-pillar (passenger side) to reach your 12V outlet.
Rear Camera: Connect the rear camera cable to the "AV-IN" port on the main unit. Run the cable along the roofline to the rear window.
4. Accessing the Digital Manual
If you need the full, illustrated text:
Inside the App: Open the Okcar app on your phone, go to Settings or Profile, and look for "Help" or "User Manual." Most of these cameras bundle the manual directly into the app's software.
On the Box: Many Joxom units now include a QR code on the side of the box or the back of the device that links directly to a mobile-optimized manual.
Troubleshooting Note: If the camera says "Memory Error" or "Please Format Card" repeatedly, your SD card may not be fast enough. Ensure it is a U3 speed class card, as 4K video requires high write speeds.
.png)
No comments:
Post a Comment